airFiber

"Our airFiber link survived Hurricane Sandy and remained operational except for a power outage. Wired operators were down for weeks."

Alan Kurian — CTO at NuVisions Broadband

New airFiber5

Two airFiber models are available for 5 GHz. The model, AF5, features the popular mid-band frequencies, which are freely used in many parts of the world.

The high-band model, AF5U, can use the less congested, 5.9 and 6 GHz bands (as permitted by local country regulations) and has robust filtering to enable co-location with devices operating in the lower 5 GHz bands.

Advanced Antenna System

Featuring a dual-independent 2x2 MIMO 24GHz hi-gain reflector antenna system, airFiber can operate in both FDD (Frequency Division Duplex) and HDD (Hybrid Division Duplex) modes for unparalleled speed and spectral efficiency in the 24GHz worldwide license-free band.

Built for Speed and Range

Operating in the 5GHz band, airFiber 5 builds on the innovations in airFiber 24 to enable speeds up to 1Gbps and introduces new eXtended Range Technology (xRT) to provide 100+Km maximum range.

Loaded with Powerful Features

airOS F is an intuitive, versatile, highly developed Ubiquiti firmware technology that resides on airFiber. It is exceptionally intuitive and was designed to require no training to operate. Behind the user interface is a powerful firmware architecture which enables hi-performance network backhauls.

airOS F tools:

  • Speed Test
  • Antenna Alignment
  • Device Discovery
  • Site Survey
  • Ping
  • Traceroute

airOS F Integrated Technologies

airFiber’s purpose-built hardware provides superior wireless performance, higher capacity, and lower latency.
Unlike standard WiFi protocols, Ubiquiti airFiber’s Hybrid Division Duplex (HDD) provides the best of both worlds — latency performance of Frequency Division Duplex (FDD) with the spectral efficiency of Time Division Duplex (TDD).

Wireless Modes

  • Master
  • Slave

Wireless Network Configuration

  • Transmit Frequency
  • Receive Frequency
  • Output Power
  • Modulation Rate
  • Automatic Modulation Rate Adaptation
  • Duplex: Half or Full
  • High/Low RX Gain
  • Wireless Security: AES-128

Network Mode

  • Transparent Layer 2 Bridge

Network Configuration

  • In-Band Management
  • Management VLAN

Management

  • Automatic check for airOS F Updates
  • Configuration Test Mode
  • Firmware Recovery via TFTP
  • Reset to Factory Defaults
  • Configuration Management: Backup/Restore Device Configuration
  • Administrator/Read-Only Access
  • WEB/SSH/Telnet Access
  • Dynamic DNS
  • NTP Client
  • Ping Watchdog
  • SNMP v1 Support
  • System Log: Local/Remote
  • Full Statistical Performance Reporting

Tools

  • Speed Test
  • Antenna Alignment
  • Device Discovery
  • Ping
  • Traceroute

Outdoor Carrier Class Shielded ethernet cable

Protect your networks from the most brutal environments with Ubiquiti’s industrial-grade shielded ethernet cable, TOUGHCable.

TOUGHCable PRO

Category 5e Outdoor Carrier Class Shielded Cable.

TOUGHCable CARRIER

Category 5e outdoor carrier-class shielded cable that features an Anti-Crosstalk Divider, additional shielding and is rated to provide optimal performance on Gigabit Ethernet networks.

Both models currently come in 1000ft (304.8m) lengths and 24 AWG.

TOUGHCable Connectors

Use TOUGHCable with Ubiquiti TOUGHCable Connectors (sold separately)