Ubiquiti Networks
-
airMAX TDMA Protocol
airMAX M series Technology provides performance improvements in latency, throughput, & scalability compared to other outdoor systems in its class.
-
Powerful Software Features
Powered by Ubiquiti's powerful airOS loaded with features and optimizations for outdoor wireless performance, Ubiquiti's airMAX platform also features airView Spectrum Analysis and airControl central device management.
-
World Class Antenna Design
Ubiquiti's Antenna R&D team applied their years of experience in celular basestation antenna design in developing the revolutionary airMAX.
-
Frequency Freedom
Ubiquiti offers airMAX systems for the 900MHz, 2.4GHz, 3GHz, 5GHz, 6GHz and 10GHz bands.
Powering the next-generation of Carrier Class PtP and PtMP airMAX networks. The Ultimate Outdoor Wireless BaseStation for the Global Wireless ISP Industry.
Available Models:
Rocket M, Rocket M GPS, Rocket M Ti
Rocket M Series Datasheet-
Rocket M series units seamlessly integrate with airMAX BaseStation, airMAX Omni, airMAX Yagi and Rocket Dish antennas.
-
Latency remains low for voice and video applications as network scales.
-
Breakthrough speed 150+ Mbps real TCP/IP throughput.
-
Rocket M GPS products have integrated Ubiquiti airSync technology, which enables units to utilize GPS signals for precision timing.
The NanoStation M combines Powerful airMAX CPE radio and MIMO antenna array performance in a compact form factor.
Available Models:
NanoStation M, NanoStation Loco M
-
Hi-power, linear 2X2 MIMO radios with enhanced receiver performance.
-
+/- 15kV radio frequency and ethernet electrostatic discharge (ESD) protection.
-
Breakthrough speed 150+ Mbps real TCP/IP throughput.
-
The device was specifically designed for outdoor PtP bridging and PtMP airMAX base-station applications.
The Bullet turns any antenna into a powerful airMAX system. Just plug and go.
Available Models:
Bullet M, Bullet Titanium M
N-type connector requirement.
-
With up to 600mW of power and enhanced receiver design, the Bullet M is ideal for long-distance links.
-
The device was specifically designed for outdoor PtP bridging and PtMP airMAX base-station applications.
-
Breakthrough speed 100+ Mbps real TCP/IP throughput.
-
+/- 15kV radio frequency and ethernet electrostatic discharge (ESD) protection.
The NanoBridge M combines great throughput, noise immunity, and a highly directive antenna for hi-performance CPE applications.
Available Models:
NanoBridge M mid-gain, NanoBridge M hi-gain
-
InnerFeed antenna technology with complete radio system integration.
-
Breakthrough speed 150+ Mbps real TCP/IP throughput.
-
The device was specifically designed for outdoor PtP bridging and PtMP airMAX base-station applications.
-
+/- 15kV radio frequency and ethernet electrostatic discharge (ESD) protection.
PowerBridge M is ideal for powerful PtP airMAX applications that require compact installation without performance compromise.
Available Models:
PowerBridge M
-
Breakthrough speed 150+ Mbps real TCP/IP throughput.
-
The device was specifically designed for outdoor PtP bridging and PtMP airMAX base-station applications.
-
Latency remains low for voice and video applications as network scales.
-
+/- 15kV radio frequency and ethernet electrostatic discharge (ESD) protection.
airGrid M provides incredible price/performance for airMAX CPE applications.
Available Models:
airGridM M mid-gain, airGridM M hi-gain
-
InnerFeed antenna technology with complete radio system integration.
-
Breakthrough speed 100+ Mbps real TCP/IP throughput.
-
The device was specifically designed for outdoor PtP bridging and PtMP airMAX base-station applications.
-
+/- 15kV radio frequency and ethernet electrostatic discharge (ESD) protection.
Miniature Size, Powerful Performance
Pico Station M is ideal for applications require long-range performance and a minimal installation footprint. It can be deployed either indoor or outdoor environments and can function either as an AP or airMAX Station.
Available Models:
PicoStation M2-HP
Loaded with Powerful Features
airOS is an intuitive, versatile, highly developed Ubiquiti firmware technology that resides on Ubiquiti Station products. It is exceptionally intuitive and was designed to require no training to operate. Behind the user interface is a powerful firmware architecture which enables hi-performance outdoor multipoint networking.
airOS tools:
- airView
- Speed Test
- Antenna Alignment
- Device Discovery
- Site Survey
- Ping
- Traceroute
airOS Integrated Technologies
airMAX – Provides superior wireless performance, more clients per Access Point (AP), and lower latency.
Unlike standard WiFi protocol, Ubiquiti's Time Division Multiple Access (TDMA) airMAX protocol allows each client to send & receive data using pre-designated time slots scheduled by an intelligent AP controller.
This "time slot" method eliminates hidden node collisions & maximizes air time efficiency. It provides many magnitudes of performance improvements in latency, throughput, & scalability.
airSelect – Dynamically changes the wireless channel to avoid interference.
airView – Advanced spectrum analyzer functionality: waterfall, waveform, and real-time spectral views allow operators to identify noise signatures and plan their networks to minimize noise interference.
airSync *Only GPS series – Synchronizes transmission by GPS series devices to eliminate co-location transmit interference.
airControl - a powerful and intuitive web based server network management application which allows operators to centrally manage entire networks of Ubiquti devices.
Wireless Modes
- Access Point
- Station/Client
- AP-Repeater
Wireless Network Configuration
- airMAX Mode
- airSelect Mode
- Long Range PtP Link Mode
- Mixed IEEE 802.11 Mode (A/N or B/G/N)
- WDS (Transparent Bridge Mode)
- Selectable Channel Width: 2/3/5/8/10/20/25/30/40 MHz
- Auto Channel Selection
- Channel Shifting
- Transmit Power Control: Automatic/Manual
- Automatic Distance Selection (ACK Timing)
- SSID Broadcast Disabling
- Wireless Access Control List
- Wireless Security: WEP/WPA/WPA2
- Wireless Client Isolation
- Adjustable Aggregation Frames/Bytes
- WMM
Device Configuration
- Administrator/Read-Only Access
- Location: Latitude and Longitude
- Signal LED Indication Level Management
- WEB/SSH/Telnet Access
- Block Management Access
- Dynamic DNS
- NTP Client
- Ping Watchdog
- SNMP v1 Support
- System Log: Local/Remote
- Full Statistical Performance Reporting
Network Modes
- Transparent Layer 2 Bridge
- Router
- SOHO Router
Network Configuration
- Simple/Advanced Configuration Mode
- Multiple VLANs Support
- Multiple Bridge Support
- DHCP Server/Client/Relay
- DNS Proxy
- Adjustable MTU
- PPPoE Client
- IP Aliasing: Auto/Static
- Fallback IP Support: DHCP/PPPoE
- MAC Address Cloning
- Port Forwarding (NAPT)
- Masquerading (NAT)
- Static Routing
- Multicast Routing
- Firewall: Layer 2/IPv4/IP-P2P
- Traffic Shaping: Ingress/Egress
- DMZ
- UPnP
Management
- Automatic check for airOS Updates
- Configuration Test Mode
- Firmware Recovery via TFTP
- Reset to Factory Defaults
- Configuration Management: Backup/Restore
The first of its kind, airMAX Omni antennas deliver carrier-class, 2X2 dual-polarity, omni-directional MIMO performance. They are designed for seamless integration with Ubiquiti airMAX Rocket hardware.
Disruptive 2X2 MIMO price/performance Basestation antennas. Designed to seamlessly integrated with Ubiquiti airMAX Rocket hardware for powerful basestation applications. Featuring great cross-pol isolation, gain, beamwidth patterns, and adjacent frequency noise attenuation performance.
Providing adjustable beamwidth from 60 to 120 degrees combined with great isolation performance, the new titanium sectors provide additional scalability and noise immunity performance in hi-noise environments and co-location deployments.
Carrier Class Performance. Breakthrough Price Points. Instantly pair with Ubiquiti Rocket hardware to create powerful 2X2 MIMO PtP Bridging applications.
Hi-gain 16dBi 2X2 MIMO performance for long distance 900MHz applications. Designed to be seamlessly paired with RocketM900 hardware.
Advanced Power over Ethernet Controllers
TOUGHSwitch PoE
Cost effective 5-port Gigabit switch with 24V PoE support for each port. It is ideal for powering Ubiquiti airMAX, UniFi, and airVision devices.TOUGHSwitch PoE PRO
Gigabit Ethernet performance combined with Industrial strength construction and a 150Watt power supply. The TOUGHSwitch PRO version is capable of powering up to eight 24V or 48V devices with software selectable output voltage control. It is the ideal PoE solution for use with Ubiquiti airMAX base station deployments.TOUGHSwitch PoE CARRIER
Dual TOUGHSwitch PoE PRO systems combined in a rack mount 1U form factor. 300W of power supporting up to 16 devices.
Outdoor Carrier Class Shielded ethernet cable
Protect your networks from the most brutal environments with Ubiquiti’s industrial-grade shielded ethernet cable, TOUGHCable.
TOUGHCable PRO
Category 5e Outdoor Carrier Class Shielded Cable.TOUGHCable CARRIER
Category 5e outdoor carrier-class shielded cable that features an Anti-Crosstalk Divider, additional shielding and is rated to provide optimal performance on Gigabit Ethernet networks.Both models currently come in 1000ft (304.8m) lengths and 24 AWG.
TOUGHCable Connectors
Use TOUGHCable with Ubiquiti TOUGHCable Connectors (sold separately)
-
Increase Performance
Dramatically improve your ethernet link states, speeds, and overall performance with Ubiquiti TOUGHCables.
-
Extreme Weather-proof
TOUGHCables have been built to perform even in the harshest weather and environments.
-
Protects against ESD Attacks
Protect your networks from devastating ESD Attacks, TOUGHCables eliminate ESD attacks and ethernet hardware damage.
-
Extended Cable Support
TOUGHCables have been developed to have increased power handling performance for extended cable run lengths.
EU Version & USA Version Available
POE-15, POE-24, and POE-48, designed by Ubiquiti, are now shipping. The POE-15 features earth grounding/ESD protection, and power LED. The POE-24 features earth grounding/ESD protection, power LED, and remote reset capability. The POE-48 features earth grounding/ESD protection, and power LED. All three are available in USA (NEMA 5-15) and EU (CEE 7/16) Versions.
Instant 802.3af is ideal for use with Ubiquiti's family of Airmax and 802.11a/b/g ISP products.
Available in both indoor and outdoor versions.
Longer 48V cable runs capable because of increased efficiency of power delivery (less current).
Additional +/-15kV of ethernet isolation and ESD/Surge protection to device.
Works seamlessly with Cisco Catalyst and other 802.3af Switches for remote power control.
$19 MSRP.
Vertically and Horizontally Adjustable
Available now, the Ubiquiti Networks Window/Wall Mounting kit for NanoStation. The kit comes with interchangeable mounting adapters(suction mount for window, wall screws for wall) so the NanoStation can be easily fitted on a window or wall. Vertically and horizontally adjustable.
Introducing Universal Arm Bracket (UB-AM) by Ubiquiti. Designed for wall or poles, UB-AM provides a versatile and robust solution for mounting all of your devices. Now Shipping.
- Downloads
- AirMax Flyer
- AirMax CPE Comparison
| Description | Download |
|---|
