AirControl Beta Download Link

UBNT-Mike.Ford · 10-01-2009, 03:27 PM

AirControl Management software (beta) download links:

Use auto-update when running version 1.0.04 or later. Manual update for existing installation (no full re-install and re-provision):

shutdown AirControl service
delete directory <AC-HOME>/webapps/ROOT
copy file http://www.ubnt.com/downloads/aircontrol/ROOT.war to <AC-HOME>/webapps/ROOT.war (DO NOT UNPACK)
(re)start service

Windows Installer
http://www.ubnt.com/downloads/aircontrol/aircontrol-1.2-beta-win32.exe

Debian Installer
http://www.ubnt.com/downloads/aircontrol/aircontrol_1.2-beta_all.deb

Generic Tarball
http://www.ubnt.com/downloads/aircontrol/aircontrol-1.2-beta.tar.gz

Also see:

User Guide
Release Notes

If you are on the same computer you installed the service on, please open your web browser and type in http://localhost:9080 if you set up on defaults settings.

Please report any bugs or suggestions you may have through this forum.

ajaywi · 10-01-2009, 06:11 PM

Remeber guys to be able to do anything with devices using AirOS 3 it has to be upgraded to latest FW available in the forum.

Mike Thank you so much for the info today.. And for the work you guys did on airControl already this program is great!!!!

agsweeney · 10-01-2009, 06:24 PM

I just sucessfully upgraded two devices from 3.4 to 3.5RC with AirControl.

Update to XS2.ar2316.v3.5-rc.4448.090910.1708 scheduled.
Update to XS2.ar2316.v3.5-rc.4448.090910.1708 complete

This is going to be very useful - thanks!

UBNT-Thomas · 10-01-2009, 08:02 PM

Quote:

Originally Posted by ajaywi

Remeber guys to be able to do anything with devices using AirOS 3 it has to be upgraded to latest FW available in the forum.

AirOS 3.4 is minimum requirement for AirControl for a/b/g devices. 3.5 is preferred as it will also report the network ID from discovery scan.

AirControl will detect older, pre 3.4 firmware versions and give you the option to upgrade when you connect, provided you load the needed firmware into the application beforehand.

See <AIRCONTROL_HOME>/docs/index.html for basic information on usage.

sbrown · 10-02-2009, 01:36 AM

Are there plans to make AirControl do more than just firmware upgrades? Like pushing config changes out?

I tried adding a AP that was on a different subnet, entered the IP and MAC address - it wouldn't connect. Wouldn't even prompt for a username and password. I could SSH into it from the same computer, but not via AirControl (Connecting to a 3.4 AP).

This is a big one for me, because I have multiple subnets, so I am fine with the limitation of the auto-scan tool, but I need the manually entered ones to work too

rmeche · 10-02-2009, 06:15 AM

I installed Air Control on a new fully patched Windows Server 2003 server and the service will not load. The software loaded fine but service does not start. Event viewer shows me Event ID: 7024 - The Ubiquity AirControl service terminated with service-specific error 0 (0x0). Please advise.

matthewgk1 · 10-02-2009, 09:04 AM

Yeah, I'm having the same issue with installing AirControl on my NM Server which is a 2003 Server. Same error codes and results. We use 2003 because it handles multiple terminal sessions better than XP and would prefer to have the application there.

lncommunications · 10-02-2009, 09:10 AM

Service won't start under two of my XP machines both have SP3 and Latest Java :(

lncommunications · 10-02-2009, 09:56 AM

AirControl loads on my Windows7 laptop but when connecting to a remote network via VPN it won't discover any devices.

When manually adding a device using IP and MAC it won't connect says "AUTH-cancel" in the log.

I have tried connecting to the devices using PuTTY SSH client and it works fine, any pointers guys? ta.

wisptec2 · 10-02-2009, 01:58 PM

Quote:

Originally Posted by lncommunications

AirControl loads on my Windows7 laptop but when connecting to a remote network via VPN it won't discover any devices.

When manually adding a device using IP and MAC it won't connect says "AUTH-cancel" in the log.

I have tried connecting to the devices using PuTTY SSH client and it works fine, any pointers guys? ta.

It used Broadcast trafic to discover just like the discovery tool. that wount work over VPN. All VPNs block broadcast trafic b/c they are on diferent subnets. now i am waiting to try to discover my network when i am hard wired in, then see if it keeps the found radios. i will post back with my resoltes. hope that helps

Thanks
Eli

10-01-2009, 03:27 PM	#1
UBNT-Mike.Ford UBNT Master Technologist Join Date: Aug 2007 Posts: 7,818	AirControl Beta Download Link AirControl Management software (beta) download links: Use auto-update when running version 1.0.04 or later. Manual update for existing installation (no full re-install and re-provision): shutdown AirControl service delete directory <AC-HOME>/webapps/ROOT copy file http://www.ubnt.com/downloads/aircontrol/ROOT.war to <AC-HOME>/webapps/ROOT.war (DO NOT UNPACK) (re)start service Windows Installer http://www.ubnt.com/downloads/aircontrol/aircontrol-1.2-beta-win32.exe Debian Installer http://www.ubnt.com/downloads/aircontrol/aircontrol_1.2-beta_all.deb Generic Tarball http://www.ubnt.com/downloads/aircontrol/aircontrol-1.2-beta.tar.gz Also see: User Guide Release Notes If you are on the same computer you installed the service on, please open your web browser and type in http://localhost:9080 if you set up on defaults settings. Please report any bugs or suggestions you may have through this forum. __________________ Last edited by UBNT-Thomas; 06-24-2010 at 04:36 PM. Reason: updated installer links for 1.2

10-01-2009, 06:11 PM	#2
ajaywi Member Join Date: Aug 2009 Location: Illinois Posts: 64	Reminder Remeber guys to be able to do anything with devices using AirOS 3 it has to be upgraded to latest FW available in the forum. Mike Thank you so much for the info today.. And for the work you guys did on airControl already this program is great!!!!

10-02-2009, 09:04 AM	#7
matthewgk1 New User Join Date: Jun 2009 Location: Chain - o - Lakes Illinois Posts: 3	Windows Server 2003 Compatibility Yeah, I'm having the same issue with installing AirControl on my NM Server which is a 2003 Server. Same error codes and results. We use 2003 because it handles multiple terminal sessions better than XP and would prefer to have the application there. __________________ OAW

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

10-01-2009, 06:24 PM	#3
agsweeney Senior Member Join Date: Jun 2009 Location: Illinois Posts: 201	I just sucessfully upgraded two devices from 3.4 to 3.5RC with AirControl. Update to XS2.ar2316.v3.5-rc.4448.090910.1708 scheduled. Update to XS2.ar2316.v3.5-rc.4448.090910.1708 complete This is going to be very useful - thanks!

10-02-2009, 01:36 AM	#5
sbrown Junior Member Join Date: Jul 2008 Posts: 25	Are there plans to make AirControl do more than just firmware upgrades? Like pushing config changes out? I tried adding a AP that was on a different subnet, entered the IP and MAC address - it wouldn't connect. Wouldn't even prompt for a username and password. I could SSH into it from the same computer, but not via AirControl (Connecting to a 3.4 AP). This is a big one for me, because I have multiple subnets, so I am fine with the limitation of the auto-scan tool, but I need the manually entered ones to work too

10-02-2009, 06:15 AM	#6
rmeche Member Join Date: Sep 2009 Location: Texas Posts: 46	I installed Air Control on a new fully patched Windows Server 2003 server and the service will not load. The software loaded fine but service does not start. Event viewer shows me Event ID: 7024 - The Ubiquity AirControl service terminated with service-specific error 0 (0x0). Please advise.

10-02-2009, 09:10 AM	#8
lncommunications Senior Member Join Date: Jun 2008 Location: UK Posts: 392	Service won't start under two of my XP machines both have SP3 and Latest Java :(

10-02-2009, 09:56 AM	#9
lncommunications Senior Member Join Date: Jun 2008 Location: UK Posts: 392	AirControl loads on my Windows7 laptop but when connecting to a remote network via VPN it won't discover any devices. When manually adding a device using IP and MAC it won't connect says "AUTH-cancel" in the log. I have tried connecting to the devices using PuTTY SSH client and it works fine, any pointers guys? ta.